P7003

Peak Communications  
GO
  Search
About Us Products Applications Contact Us Agents & Distributors Useful Links News Room Trade Shows Support Careers
P7003
P7003

P7003
P7003 Fully Synthesised C-Band to IF DownConverter
Peak Communications was formed in 1995 and began by manufacturing the P701 L band frequency downconverter. The addition of the Upconverter module in 1996 enabled Peak Communications to produce the P702 L band upconverter and then also the P700 L band Up/Down converter in a single 1RU. Over time the product range has increased to include 19" rack mount and remote mount block up and down converters covering the main satellite operating frequencies including X, C and Ku Bands. The integration of these block converters into a P700 converter facilitated full frequency conversion from IF to SHF via L band. In 2003 the P7000 range of converters was launched to supersed the P700 range.

The P7003 is a next generation fully synthesised C-Band DownConverter which provides a low-cost solution for systems requiring an IF interface at 70 MHz ± 18 MHz or 140MHz ± 36 MHz The unit incorporates a graphics display module, membrane keyboard and features a clear and intuitive control and configuration menu fully utilising the unique graphics display. The P7003 has an integral redundancy controller for 1:1 & 1:2 operation, and a CANBUS® interface for 1:N systems.
The P7000 series of converters are designed to meet the phase noise, spurious, level and frequency stability requirements of Intelsat IBS/ Eutelsat SMS specifications and is compliant with IESS 308 / 309. The product is most suitable for both high and low rate data and both digital and analogue TV signals.
Peak Features
Compliant with IESS 308 / IESS 309 requirements
Used for 8PSK and 16QAM modulations in excess of 50Mbits/sec
Auxiliary L-Band Output

1:1 & 1:2 inbuilt redundancy control (see R1000 and R2000 redundancy unit data sheets)
CANBUS® for 1:N systems (see RCU1000 series redundancy unit data sheet)
Gain/Temperature compensated
Software trimming of internal 10MHz reference
External alarm monitoring
Software switched spectrum Inversion

If the information you require is not listed, please contact sales@peakcomm.co.uk



Sitemap Reference Pages

©2006 Peak Communications Ltd. All rights reserved | design: www.1creative.co.uk