P7022
P7022 Fully Synthesised IF to S-Band UpConverter
Peak Communications was formed in 1995 and began by manufacturing the P701 L band frequency downconverter. The addition of the Upconverter module in 1996 enabled Peak Communications to produce the P702 L band upconverter and then also the P700 L band Up/Down converter in a single 1RU. Over time the product range has increased to include 19" rack mount and remote mount block up and down converters covering the main satellite operating frequencies including X, C and Ku Bands. The integration of these block converters into a P700 converter facilitated full frequency conversion from IF to SHF via L band. In 2003 the P7000 range of converters was launched to supersed the P700 range.
The P7022 is a next generation fully synthesised S-Band UpConverter which provides a low-cost solution for systems requiring an IF interface at 70 MHz *18MHz or 140MHz *36MHz. The unit incorporates a graphics display module, membrane keypad and features a clear and intuitive control and configuration menu, fully utilising the unique graphics display. The P7022 has an integral redundancy controller for 1:1 & 1:2 operation, and a CANBUSŪ interface for 1:N systems.
The P7000 Series of converters are designed to meet the phase noise, spurious, level and frequency stability requirements of Intelsat IBS/ Eutelsat SMS specifications and are compliant with IESS 308/ 309. The products are most suitable for both high and low rate data and both digital and analogue TV signals.
Peak Features
Compliant with IESS 308 / IESS 309 requirements
Used for 8PSK and 16QAM modulations in excess of 50Mbits/sec
1:1 & 1:2 inbuilt redundancy control (see T1000 and T2000 data sheets)
CANBUSŪ for 1:n systems (see RCU1000 series data sheet)
S-Band output monitoring point
Software trimming of internal 10MHz reference
If the information
you require is not listed, please contact sales@peakcomm.co.uk
|
