UHF Switching, Monitoring & Signal Conditioning Systems
UHF Switching, Monitoring & Signal Conditioning Systems
Peak Communications was formed in 1995 and began by manufacturing the P701 L band frequency downconverter. The addition of the Upconverter module in 1996 enabled Peak Communications to produce the P702 L band upconverter and then also the P700 L band Up/Down converter in a single 1RU. Over time the product range has increased to include 19" rack mount and remote mount block up and down converters covering the main satellite operating frequencies including X, C and Ku Bands. The integration of these block converters into a P700 converter facilitated full frequency conversion from IF to SHF via L band. In 2003 the P7000 range of converters was launched to supersed the P700 range.
These units are flexible and configurable to customer specific requirements. They are designed to allow patching and remote monitoring of up to 12 separate UHF channels, whilst having the flexibility to include Amplification, filtering and other application/customer specific signal conditioning features. In addition, packaged Filters (TX reject etc.), Amplifiers and other items can be provided along with features such as Fiber-optic interfaces for cross-site applications.
These high quality units are all 19 inch rack mounted and can be powered from nominally 230 or 110 volts, with UHF or monitoring interfaces either on the front or rear panels (or a combination of both). Ruggedly constructed, they utilise high quality parts from reputable supply sources offering optimum system reliability.
The CMUseries of units are designed specifically to monitor up to 12 UHF channels. The channel to be monitored can be selected locally, remotely or set to ‘poll’ all channels. With forward and reverse coupling and a range of available coupling factors, the CMUseries contain the necessary switching, routing, processing and control circuitry to implement a full local or remote (RS232/485/Ethernet) based UHF monitoring system.
The PPseries of units are designed specifically as UHF patch panels that allow the system operator to easily reconfigure the UHF circuit locally as operational demands change. Inputs and outputs are located on the rear panel, with patch ‘links’ provided on the front of the unit.
The DAH200series Dual, ‘Hot swappable’, modular, UHF amplifiers are designed to provide low power Amplification in a compact and easily maintainable configuration for ultimate system availability. Modules can be easily inserted/ replaced in the DAH200series 1U high unit from the rear, without the need to remove power or disturb the other channel in any way.
Peak Features
Low loss and low ripple.
Exceptional channel to channel isolation.
Other frequency bands available.
Flexibility in use, for easy system re-configuration.
Optimal reliability through use of highest quality parts.
Ease of maintenance for optimal system availability.
Flexibility in design allows custom/application specific designs to be considered.
Dual ‘Redundant’ Power Supplies with dual mains inputs available.
Full remote control and alarm monitoring
If the information
you require is not listed, please contact sales@peakcomm.co.uk
|
